John Deere Compact Tractor Pallet Forks

The Redline Systems Inc. John Deere pallet forks were designed specifically for use and capacity of the John Deere sub compact tractor line. Being these tractors have such limited lift capacity everything you put in front of it has to kept light yet durable enough to handle the abuse these tractors can take. These are a much better option for people that want to use their tractor for moving palletized material around or picking up logs. The clip on bucket forks work for some people but eventually end up bending and distorting the factory dirt bucket and the lift capacity is very minimal due to where the bulk of the weight is positioned in front of the bucket. This unit has been to designed to maximize the lift capacity the tractor has and will keep the weight as close to the loader pivot points as possible for maximum lifting force. The carriage is constructed of all .25" A36 steel plate. The hitch mounts are made with .25" A36 steel plate and are compatible with John Deere’s proprietary quicktach system. There is also tie point cut into the side rail of the carriage to help hold something on the forks or assist in tying the tractor down on a trailer. And an 8" tall back stop integrated into the carriage. The forks are USA made cascade brand and are 36" in length. The fork rails are made from 3/8" plate. They are built to be durable and lightweight to handle the lift capacity of the John Deere subcompact tractors, which ever one you may have. There a center load design so they can’t fall off the end of the rail and are adjustable in width along the rail. This is a must have attachment for the John Deere user and will end up on the tractor more than any other attachment in most cases.

Specifications:

  • Carriage width: 49"
  • width: 9" overall
  • Height: 24"
  • weight: 190 lbs
  • fork length: 36"
  • .25" A36" steel plate carriage construction.
  • 3/16" A36 plate fork construction.
  • integrated tie point inside rial.
  • adjustable forks.
  • rated for the 700 lbs lift capacity of the John Deere subcompact tractor. (depending on model of loader.)
  • lightweight design maximizing lift capacity.
  • compatible with John Deere’s proprietary quicktach system.
  • powder coated finish.
  • Made in the USA.

Compatible Models (call to verify):

  • John Deere Sub-compact Tractor Pallet Forks
  • John Deere Compact Tractor Pallet Forks
  • John Deere 1023E Pallet Forks
  • John Deere 1025R Pallet Forks
  • John Deere 1025R TLB Pallet Forks
  • John Deere 1026R Pallet Forks
  • John Deere 2025R Pallet Forks
  • John Deere 2032R Pallet Forks
  • John Deere 2038R Pallet Forks
  • John Deere 3025E Pallet Forks
  • John Deere 3033R Pallet Forks
  • John Deere 3038E Pallet Forks
  • John Deere 3039R Pallet Forks
  • John Deere 3046R Pallet Forks
  • John Deere 4105 Pallet Forks
  • John Deere 4044M Pallet Forks
  • John Deere 4044R Pallet Forks
  • John Deere 4052M Pallet Forks
  • John Deere 4052R Pallet Forks
  • John Deere 4066M Pallet Forks
  • John Deere 4066R Pallet Forks
  • John Deere attachments
  • John Deere Compact Tractor attachments
  • John Deere attachments for sale
  • John Deere compact utility tractor attachments
  • John Deere utility tractor attachments
  • John Deere 1 series attachments
  • John Deere 2 series attachments
  • John Deere 3 series attachments
  • John Deere 4 series attachments
  • Deere attachments
MSRP
$625.00
Manufacturer: